manualshive.com logo in svg

Sokkia CX-62, Operator'S Manual, Page: 132 / 315

Share
Download
Sokkia CX-62 Operator'S Manual Download Page 132

124

19. TOPOGRAPHY OBSERVATION

5. Enter backsight point coordinates.

Enter the coordinates for the 
backsight point and press 

[OK]

.

If "No" is set for (5) Backsight 
distance measurement (BS Obs-
Dist) or (6) Backsight distance 
check (BS DistCheck) in the 
observation setting, this screen is 
not displayed.

6. Register collimation point.

Set the name for the collimation 
point in advance. Press 

[ADD]

, 

enter the point name and press 

[OK]

 to register.

After registering the point to be 
measured, press 

[OK]

 to move to 

measurement.

"19.2 Observation"

If "No" is set for (4) Pre-entered 
point registration (PreenterPt) in 
the observation setting, this screen 
is not displayed.

• Pressing 

[DEL]

 deletes the 

selected point.

• Pressing 

[EDIT]

 enables to 

change the name of the selected 
point.

• Pressing 

[TOPO II]

 in the OBS mode also enables the same procedure.

 

[TOPO II]

 allocation: "33.3 Allocating Key Functions"

• Number of characters, range and choices of the setting are as follows (*is the 

default setting):

•Number of distance sets: 1 * /2
•Number of distance readings: 1 * (Fixed)
•RL observation: Yes / No *
•Pre-entered point registration: Yes / No *

Topography

BS coord

NBS:

EBS:

PT  AUTO1000

0.000

0.000

OK

LOAD

PreenterPt

01: T-1

02: T-3

03:

04:

ADD

DEL

EDIT

OK

PreenterPt

PT

T-4

Summary of Contents for CX-62




























































































































































































































































































































Reviews:

No comments