102
16. SETTING-OUT LINE
(2) Line: Distance along the
baseline from the first point to
the position at which a line
extending from the required
point intersects the baseline at
right angles (X direction).
(3) Offset: Distance from the
required point to the position
at which a line extending from
the required point intersects
the baseline at right angles (Y
direction).
•
[
]/[
]
: Press to decrease/
increase the value by the
amount set in "Incr".
3. Press
[OK]
on the screen of step
2. The coordinate value of the
required point is calculated and
displayed.
•
[REC]
: records the coordinate
value as a known point data.
Recording method:
"30.1 Registering/Deleting
Known Point Data"
• Press
[S-O]
to move to setting-
out measurement of the required
point.
4. Press
{ESC}
. Continue the
measurement (repeat steps from
2).
S e t - o u t l i n e
12.024
94.675
N
E
Z
111.796
REC
S-O