Sokkia 130R Series, Operator'S Manual, Page: 58 / 182

13. RESECTION MEASUREMENT
50
N, E, Z of an instrument station is determined by the measurement.
• Between 2 and 10 known points can be measured by distance measurement,
and between 3 and 10 known points by angle measurement.
X
PROCEDURE
1. In the second page of Meas mode
screen, press [MENU] , then select
"Resection".
2. Select “NEZ” and input the known
point.
After setting the coordinates for the
first known point press
[NEXT] to
move to the second point.
When all required known points
have been set, press
[MEAS] .
• When [READ] is pressed,
registered coordinates can be
recalled and used.
C
"12.1 Entering Instrument
Station Data, PROCEDURE
Reading in Registered
Coordinate Data"
• Press {ESCAPE} to return to the
previous known point.
3. Sight the first known point and
press [DIST] to begin
measurement.
The measurement results are
displayed on the screen.
• When [ANGLE] has been
selected, the distance cannot be
displayed.
13.1 Coordinate Resection Measurement
REM
Resection
Area calculation
Set-out line
Point projection
m
2 n d P t .
READ
REC
NEXT
MEAS
Resection.
NEZ
Elevation
1 s t P t .
C
X130R.book 50 ページ ２００３年１０月８日 水曜日 午後１２時５３分