10. ANGLE MEASUREMENT
32
You can reset the horizontal angle to a required value and use this value to find
the horizontal angle of a new target.
X
PROCEDURE
1. Sight the first target.
2. In the second page of the Meas
mode screen, press
[H.ANG]
.
Select “H angle.”
3. Enter the angle you wish to set,
then press
{
I
}
.
The value that is input as the
horizontal angle is displayed.
4. Sight the second target.
The horizontal angle from the
second target to the value set as
the horizontal angle is displayed.
$
• Pressing
[HOLD]
performs the same function as above.
• Press
[HOLD]
to set the displayed horizontal angle. Then, set the angle that is
in hold status to the direction you require.
C
Allocating
[HOLD]
: "25.3 Allocating Key Functions"
10.2
Setting the Horizontal Angle to a Required
Value (Horizontal Angle Hold)
X130R.book 32 ページ ２００３年１０月８日 水曜日 午後１２時５３分
Summary of Contents for 130R Series
Page 8: ...vi X130R book vi ページ ２００３年１０月８日 水曜日 午後１２時５３分 ...
Page 176: ...33 REGULATIONS 168 CE Conformity Declaration X130R_33 FM 168 ページ ２００４年１月１３日 火曜日 午後４時４９分 ...
Page 177: ...169 33 REGULATIONS X130R_33 FM 169 ページ ２００４年１月８日 木曜日 午前１１時５分 ...