Softing dataFEED uaGate 840D User Manual Download Page 43

Page: 43 / 47

Chapter 6 - Service Settings

6.7 Support

The

Support

page provides means to access additional information in case of problems.

Click the

Start

button in the

Capture network traffic

section to start logging the network traffic on all

Ethernet interfaces of the dataFEED Gateway.
Once the

Start

button has been clicked, a new network capture file is recorded every 15 minutes. Recording

stops after about 25 hours or upon device restart.
The capture files are stored on the micro SD card. Thus, this feature only is available, if a writeable micro SD
card has been inserted in the dataFEED Gateway.

Click the

Browse

button in the

Capture files

section to access the previously recorded network capture files.

The files are suitable to be viewed using the free and open-source

Wireshark

packet analyzer tool (see

www.wireshark.org)

Summary of Contents for dataFEED uaGate 840D
















































Search results

Summary of Contents for dataFEED uaGate 840D

Reviews:

Related manuals for dataFEED uaGate 840D

Brands by name

Popular brands

Softing dataFEED uaGate 840D, User Manual

Search results

Summary of Contents for dataFEED uaGate 840D

Reviews:

Related manuals for dataFEED uaGate 840D

Brands by name

Popular brands