42
© Softing Industrial Automation GmbH
dataFEED Gateway - User Manual
9 Declarations of Conformity
This device is compliant with EC directive 2014/30/EG for "Electromagnetic Compatibility" (EMC) and meets the
following harmonized standards:
EN 55011
Industrial, scientific and medical (ISM) devices - radio disturbance - limits and methods of
measurement
EN 61000-6-4
Electromagnetic compatibility (EMC); Part 6-4: generic standard – emission for industrial
environments
EN 61000-6-2
Electromagnetic compatibility (EMC); Part 6-2: generic standard - immunity for industrial
environments
Note
To fulfill the EMC requirements, the other components of your installation (DC adapter, Industrial
Ethernet devices, etc.) also have to meet the EMC requirements. A shielded cable must be used. In
addition, the cable shield must be grounded properly.
CAUTION
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures!
CE
For this device a Declaration of Conformity in compliance with the CE standard has been made.
It can be requested from Softing Industrial Automation GmbH.
ROHS
This device is ROHS compliant.
FCC
This device has been tested and found to comply with the limits for a Class A digital device, under
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
VCCI
This Class A device conforms to the regulations of Voluntary Control Council for Interference (VCCI)
by Information Technology Equipment.
WEEE
Electrical and electronic equipment must be disposed of separately from normal waste at the end
of its operational lifetime. Packaging material and worn components shall be disposed of according
to the regulations applicable in the country of installation.
REACH
For this device a Statement in compliance with the
European Union Directive “REACH” N°1907/2006
has been made.
It can be requested from Softing Industrial Automation GmbH.
