SmartSMS User Manual
Soft dB inc.
User Manual
p. 33
6.2 System Status and Main Functions
The bottom part of the main interface shows the System Status of the SmartSMS unit(s)
connected to the PC and the main functions.
Figure 25: System Status overview
Green light: the SmartSMS is running and is sending out the masking
sound on all channels. Red light: the system is stopped and is not
generating any masking sound.
Green light: the current configuration parameters have been saved in
the configuration file on the PC. Red light: the current configuration
parameters have been changed but not saved on a PC.
Green light: the current configuration parameters have been loaded into
the SmartSMS unit(s); Red light: the current configuration parameters
have been changed in the software but not loaded in the SmartSMS
unit(s).
Green light: the rise time process is completed and the system has a
rise time volume of 0 dB in each zone.
Green light: indicates that the active controller is ON. Red light: the
onboard active controller is OFF. See section 0 for details about the
active control module.
Number of SmartSMS units connected to the PC and working together.
This function saves the current configuration file on the PC at the
specified location.
This function opens a configuration file on the PC.
This function loads the current configuration parameters into the
SmartSMS unit. The status LED has been updated according to the new
set-up.
