SmartSMS User Manual
Soft dB inc.
User Manual
p. 13
2.5 Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) Use only the recommended power pack supplied by Soft dB.
16) We recommend using Soft dB loudspeakers with the SmartSMSII sound masking system. Other
25V/75V loudspeakers can be used, only if the maximum power load is not exceeded on each
channel. See section 4.2 for more information.
CAUTION:
Do not use 4- or 8-ohm speakers with the SmartSMSII unit. This could damage the
amplifier.
17) The Real Time Clock module is equipped with a lithium battery (model CR2032). The battery is
not user-serviceable and does not need to be changed during the lifetime of the SmartSMS unit.
The battery does not provide power if the SmartSMS unit is ON, and can provide 10 years of power
if the SmartSMS unit is OFF.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
