![Soft dB SmartSMS 2 User Manual Download Page 12](http://html1.mh-extra.com/html/soft-db/smartsms-2/smartsms-2_user-manual_1312055012.webp)
SmartSMS User Manual
Soft dB inc.
User Manual
p. 12
2.4 Symbols
These symbols appears on the SmartSMSII units:
The CE marking indicates conformity with the essential health and safety requirements
set out in European Directives.
FCC indicates conformity with the Federal Communications Commission regulations
on this type of product.
The RoHS indicates conformity with the Directive on the Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC.
Conform to the European Waste Electrical and Electronic Equipment Directive
(WEEE Directive) 2002/96/EC. The WEEE symbol indicates that when the
end-user wishes to discard this product, it must be sent to separate
collection facilities for recovery and recycling.
Universal Serial Bus (USB) connector port
Front panel status indicator. Green, Yellow or Red. See section 3 for more information.
Power Supply input on the rear panel. 24 VDC input. Use only the recommended
power supply from Soft dB.
3
A sound level meter with a more limited dynamic range (for example 50 dB) and/or a minimum level of 35 dB can also be
used, but its use will require more attention (see 6.5.1).