SOFAR 3K~6KTLM-G2
User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 44 -
6. Enset country
Enable this option before setting the country.
Attention: when inverter working for power generation over 24h, country
setting is forbidden, it can only be set after LCD setting. Key in passwords for
country setting through LCD (default: 0001), country setting can be set in 24h after
keying in the correct passwords, over 24h, set through LCD again.
7. Set Energy
Set the total power generation. You can modify the total power generation
through this option.
8. Set address
Set the address (when you need to monitor multiple inverters simultaneously)
，
Default 01.
9. Set Input mode
SOFAR 3K-6KTLM-G2 has two MPPT channels, which can run
independently or in parallel. Users choose the operation mode of MPPT according
to the system design. Parallel mode is applicable to the case where two channels are
in parallel, independent mode is applicable to the case where two channels of
MPPT run independently, and the default mode is independent mode.
10. Set Language
Set the inverter display language.
Easier Way: press
“
Back
”
&
“
OK
”
at the same time to change system
language.
11. Set Start Parameter
12. Set Safety Voltage
13. Set Safety Frequency
14. Set Insulation
User can modify the above 4 parameters of the machine through the SD card,
and the user needs to copy the parameter information that needs to be modified into
the SD card in advance.
