SOFAR 3K~6KTLM-G2
User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 42 -
display interface as shown in the figure below.
6.3. Main Interface
Normal
------Press “back”
1.Enter Setting
2.Event List
3.SystemInfo
4.Display Time
5.Software Update
(A)
“
Enter Setting
”
Interface as below:
1.Enter
Setting
------Press “back”
1.Set time
12.Set Safety Voltage
2.Clear Energy
13.Set Safety Frequency
3.Clear Events
14.Set Insulation
4.Set Country
15.Set Reactive
5.On-Off Control
16.Set Power Derate
6.Enset country
17.Set Reflux
7.Set Energy
18.MPPT Scan
8.Set Address
19.StartTime
9.Set Input mode
20.Logic interface
10.Set Language
21.Set Power Ratio
11.Set Start Parameter
Press "Back" to Enter the main interface of "1.Enter Setting" and press "OK"
to Enter the Setting menu. You can select the content you want to set by pressing
"Up" or "Down".
Note1: Some settings need to enter the password (the default password is
0001), when entering the password, press "Up" or "Down" to change the number,
press "OK" to confirm the current number, and press "OK" after entering the
correct password. If "password error, try again" appears, you will need to re-enter
the correct password.
1. Set Time
Set the system time for the inverter.
