SOCATA
MODEL TB 20
SECTION 4
NORMAL PROCEDURES
The content of this document is the property of
socata
. It is supplied in
confidence and commercial security of its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor
may information contained in it be disclosed to unauthorized persons. It must not
be reproduced nor transmitted in any form in whole or in part without permission
in writing from the owners of the Copyright.
Information in this document is subject to change without notice.
© 1988, 1991, 1992, 1994 to 1996, 1997, 2000 -
socata
- All rights reserved
June 30, 1988
Revision 8
4.8
ELECTRICAL SYSTEMS
a – Cabin
”ALTr FLD” switch–breaker
OFF
Fuel pump
OFF
Main switch
ON
Advisory panel
Tested
Landing gear indicator lights
Tested
Fuel gages
Check
Flaps
RETRACT
Instrument lights
ON
Navigation lights
ON
Anticollision lights (if installed)
ON
Strobe lights (if installed)
ON
Recognition lights (if installed) (Post–MOD.151) ON
Pitot heating (if installed)
ON
Landing and taxi lights
ON
b – L.H. wing
Navigation light
Illuminated
Anticollision light (if installed)
Flashing
Recognition lights
(if installed) (Post–MOD.151)
Illuminated
Landing and taxi lights
Illuminated
WARNING
DO NOT TOUCH PITOT DIRECTLY.
IT CAN BE HOT ENOUGH TO BURN SKIN
Heated pitot (if installed)
Check heat
Stall warning device
Aural warning
NOTE :
Landing and taxi lights and Pitot heating ”OFF” before
carrying on inspection will prevent battery from being run
down.
c – R.H. wing
Navigation light
Illuminated
Anticollision light (if installed)
Flashing
Recognition lights
(if installed) (Post–MOD.151)
Illuminated