SECTION 8
AIRPLANE HANDLING, SERVICING
AND MAINTENANCE
SOCATA
MODEL TB 20
The content of this document is the property of
socata
. It is supplied in
confidence and commercial security of its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor
may information contained in it be disclosed to unauthorized persons. It must not
be reproduced nor transmitted in any form in whole or in part without permission
in writing from the owners of the Copyright.
Information in this document is subject to change without notice.
© 1988, 1991, 1992, 1994 to 1996, 1997, 2000 -
socata
- All rights reserved
June 30, 1988
Revision 5
8.3
GENERAL
This section contains the procedures recommended by SOCATA for the
proper ground handling and routine care and servicing of your SOCATA
Model TB 20 airplane. Also included in this section are the inspection and
maintenance requirements which must be followed if your airplane is to retain
its performance and dependability.
It is recommended that a planned schedule of lubrication and preventive
maintenance be followed, and that this schedule be tailored to the climatic or
flying conditions to which the airplane is subjected.
For this, see Manufacturer’s Maintenance Manual.
IDENTIFICATION PLATE
All correspondence regarding your airplane should include its serial number.
This number together with the model number, type certificate number and
production certificate number are stamped on the identification plate
attached at the rear of the fuselage beneath the horizontal stabilizer.
