SnowWolf AlphaBlower 33-100-H, Operation & Maintenance Manual

Page: 34 / 98

32
AlphaBlower Operation and Maintenance Manual
Operation
Checking AlphaBlower Operation
(Cont’d)
Engage the machine’s auxiliary hydraulics. (See
the machine’s operation manual for correct
procedure.)
Auger Rotation
Start auger rotation.
Raise the engine RPM.
Allow the snow blower auger to rotate for a short
time (approximately one minute).
Stop auger rotation.
Chute Rotation
Rotate the discharge chute in both directions. The
discharge chute should rotate freely.
Deflector Operation
Raise and lower the deflector multiple times. The
deflector should move up and down freely.
Wing Operation (if equipped)
Operate the hydraulic wing in and out multiple
times. Hydraulic wing should move freely.
Lower the engine RPM.
Disengage the machine’s auxiliary hydraulics.
Lower the snow blower to the ground.
Exit the machine. (See “Exiting The Operator’s
Position” on page 24.)
Place all controls in neutral, engage the park
brake and exit the machine. (See “Exiting The
Operator’s Position” on page 24.)
NOTE: Adjust the snow blower so that it is
level
. (See “AlphaBlower Adjustment”
on page 29.)
Move the machine and snow blower to the work
area.