SnowWolf AlphaBlower 33-100-H, Operation & Maintenance Manual

Page: 24 / 98

22
AlphaBlower Operation and Maintenance Manual
Operation
Sleep Time
All transmitters have the ability to change the
sleep time from the default to user's preference.
The transmitter is factory set to turn off (sleep)
after 15 minutes. To change the time the
transmitter waits before going to sleep, use the
following procedure:
1. With the transmitter off, press and hold buttons
3, 4, 8, and POWER.
2. Keep holding the buttons for a few seconds
then release the buttons. At this point, both
lights will blink once per second.
3. On the transmitter, press one of the following
buttons to adjust the sleep time:
a. 1=15 minutes
b. 2=30 minutes
c. 3=1 hour
d. 4=2 hours
e. 8=sleep disabled
4. Sleep time programming complete.