SNOWJOE SunjoeTRJ608E, Operator'S Manual

Page: 6 / 16

6
Unpacking
Carton Contents
• Electric grass trimmer assembly (unconnected)
• Support bracket
•
Safety guard
• ST4 x 18 partial thread screw (1)
• ST4 x 16 screws (4)
• ST4 x 12 screw (2)
• Manuals with registration card
1. Carefully remove the electric grass trimmer and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric grass
trimmer. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Fitting the Shafts
m
WARNING!
Make sure all the shafts are fully installed
before operating. Check the connection periodically during use
to avoid serious injury.
Standing in front of the trimmer to determine the right and left
side of the unit.
1. Aligning the round tab with arrow on right side of the
handle shaft with the groove on right side of the upper end
of the pole shaft, insert the handle shaft into the pole shaft
until it locks in place. Secure with two ST4 x 16 screws
provided (Figs. 1 - 2).
NOTE: You may have to carefully move the wiring inside
the pole to one side if it blocks the path of the screws.
2. Aligning the round tab with arrow on the right side of the
trimmer head shaft with the groove on the right side of the
lower end of the pole shaft, insert the trimmer head shaft
into the pole shaft until it locks securely in place. Secure
with two ST4 x 16 screws provided (Figs. 3 - 4).
Fig. 1
Handle shaft
Pole shaft
Tab
Groove
ST4 x 16 screws
Handle shaft
Fig. 2
Pole shaft
Fig. 3
Tab
Trimmer head shaft
Pole shaft
Groove