background image

A Division of Snow Joe

®

 

, LLC

Model No. TRJ609ERM

3-Amp 9.45-Inch Electric Grass Trimmer

3-Amp 9.45-Inch Electric Grass Trimmer

Form No. SJ-TRJ609ERM-880E

1

OPERATOR’S MANUAL

© 2013 by Snow Joe, LLC
All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These 

Instructions Before Use

m

CAUTION!

Before using this electric tool, carefully read and observe the 
safety rules and instructions listed below. Before starting work, 
make sure that you know how to stop the machine in case of 
an emergency. The incorrect use of this machine could cause 
serious injury. Keep these instructions in a safe place and on 
hand so that they can be consulted when required. 

m

CAUTION!

The electric grass trimmer should only be used for cutting 
lawns and for trimming along the borders of flower beds. Other 
uses of the trimmer that are not indicated in these instructions 
could damage the trimmer or seriously injure the operator.

GENERAL Safety Rules

• The electric grass trimmer must not be used by anyone 

under the age of 16.

• Always make sure the trimmer is in proper working 

condition before use.

• Before connecting the trimmer to the electric outlet, make 

sure that the rotating parts are not damaged.

• Do not use the trimmer if the cutting device is not secured 

properly or is damaged.

• Before starting the trimmer, make sure that the trimmer line 

is not touching stones or debris.

• Always wear suitable clothing when using the trimmer to 

prevent head, hand, and/or feet injuries. Use a helmet, 
safety spectacles or goggles at all times when operating 
this tool. High boots (or sturdy shoes and trousers) and 
work gloves are recommended.

• When the trimmer is in operation, keep the cutting section 

away from all parts of the body. 

• Do not start the trimmer when it is upside down or when it 

is not in the proper working position.

• 

Turn the trimmer off and disconnect the plug when

the trimmer is not in use; it is left unattended; it is being 
examined because it is not working correctly; the power 
supply cable is damaged; the trimming line spool is being 

  removed or changed or when the trimmer is being moved 

from one place to another.

• Children and other spectators, including pets, should be 

kept at least 50 feet (15 meters) away from the work area. 
When the grass is cut, stones and debris contained in the 
grass can be picked up by the trimmer and subsequently 
dispersed into the air. These flying projectiles can cause 
blindness or other bodily injury.

• Remain in a stable and secure position when operating  

the trimmer.

• Keep the cutting area free of wires, stones, and debris. 
• Do not cut against hard objects. This could cause injury or 

damage the trimmer. 

• Use the edge of the guard to keep the trimmer away from 

walls, surfaces, delicate objects and other miscellaneous 
items. 

m

CAUTION!

The safety guard is critical to the safety of the operator and the 
safety of people standing within a safe distance of the trimmer. 
The safety guard keeps the trimmer in good working order and 
must always be in place during operation. Failure to have the 
guard in place during operation is dangerous and will void the 
warranty.

• 

Keep away from the cutting line – 

It can seriously injure 

the skin.

• 

Avoid accidentally starting – 

Do not carry plugged-in tool 

with finger on the trigger. Make sure the switch is off before 
plugging in the tool.

• 

Do not force the tool – 

It will do the job better and with 

less likelihood of injury if it is used at the rate for which  
it is designed.

• 

Use the right tool – 

Do not use this tool for any job except 

that for which it is intended.

• 

Do not overreach – 

Keep proper footing and balance at 

all times.

• 

Do not try to stop the cutting device with your hands – 

Always let it come to a stop by itself. 

m

CAUTION!

The trimmer line spool will continue to rotate after turning the 
trimmer OFF. Wait until the trimmer line spool has completely 
stopped before making contact.

• Only use the same type of line originally provided with the 

trimmer.

• Do not use the trimmer to cut grass that is not in contact 

with the ground.

Summary of Contents for TRJ609ERM













Reviews: