6
Assembly
Before assembly, make sure that the tool is switched off and
unplugged.
Fitting the handle
1.
Insert the motor housing into the handle until it locks
securely in place (Fig. 1).
2.
Secure the handle with the screws provided (Fig. 1).
Fitting the safety guard
m
WARNING!
The guard must be properly installed. The
guard provides partial protection to the operator and other
bystanders from the risk of thrown objects.
1.
Fix the safety guard to the trimmer head, making sure the
sides are located along the grooves on the trimmer head
(Fig. 2).
2.
Secure the safety guard onto the trimmer head with the
screws provided (Fig. 3).
Preparing the trimmer for use
Mains supply cable strain relief
1.
In order to reduce strain on the cable inlet, form a loop and
hook the cable around the strain relief arm (Fig. 4).
Operation
m
WARNING!
Remove stones, loose pieces of wood
and other objects from the cutting area. The blade continues
to rotate for a few seconds after the trimmer is switched off.
Let the motor come to a complete stop before switching the
trimmer back on. Do not rapidly switch the trimmer off and on.
m
CAUTION!
Always wear eye protection.
Secure with screws
Fig. 1
Fig. 2
Fig. 3
Screws
Fig. 4
