SNOWJOE SunjoeTRJ608E, Operator'S Manual

Page: 7 / 16

7
Fitting the Support Bracket
1. Hold the product steadily on the handle, and insert the
support bracket on top of the handle. Press until it locks
into place (Fig. 5).
2. Fix the assembly with provided two ST4 x 12 screws
(Fig. 6).
Fitting the Safety Guard
m
WARNING!
The safety guard must be properly
installed. The guard provides the operator and other
bystanders with some protection from thrown objects.
1. Fix the safety guard to the trimmer head, making sure the
sides are located along the grooves on the trimmer head,
as shown (Fig. 7).
2. Secure the safety guard onto the trimmer head with the
ST 4 x 18 partial thread screw provided (Fig. 8).
ST4 x 16 screws
Trimmer head shaft
Fig. 4
Pole shaft
Support bracket
Fig. 5
Handle
ST4 x 12
screws
Fig. 6
Trimmer
head
Safety Guard
Fig. 7
ST 4 x 18 partial
thread screw
Fig. 8