7
2. Raise or lower the chute deflector to the desired height of the
snow stream and tighten the chute deflector knobs (Fig. 12).
Note:
Do not overtighten the chute deflector knobs.
Figure 10
Figure 12
A – Chute deflector
B – Chute deflector knob
Figure 11
A-Chute deflector
B-Discharge chute
3. Locate the upper chute crank in the parts bag. Remove the
screw and nut from the upper chute crank using a
Phillips screwdriver and the wrench provided (Fig. 13).
Note:
You may be able to unfasten the screw and nut
by hand.
Figure 13
A – Upper chute crank
B – Eye bolt with rubber grommet
C – Screw
D – Nut
A – Chute deflector
B – Chute deflector knob
C – Discharge chute
SJ622U1_MANUAL_ENG REV_Document 1 9/2/10 2:32 PM Page 7
