10
Powering On and Off
1. To power on, first press the switch button found alongside
the switch housing (Fig. 22).
WARNING
m
m
Damaged electrical cords present risk of fire,
electrical shock, and serious bodily injury.
Before operating the snow thrower, carefully examine the
electrical cord. If the cord is damaged, do not use the
snow thrower. Replace or repair the damaged cord
immediately. If you need assistance, contact an authorized
Snow Joe dealer.
Figure 20
A – Switch housing
B – Push button switch
Figure 21
A-Handle bar
2. Pull the handle bar toward you and grasp hold of it firmly
with both hands to start the machine (Fig. 21). The machine
can only be started by pressing the switch button first,
followed by squeezing the handle bar. Reverse operation
cannot start the machine.
3. To power off, release your grip on the handle bar.
SJ622U1_MANUAL_ENG REV_Document 1 9/2/10 2:32 PM Page 10
