11
© Trynex International 2012 (REV A) F50734
Operating Spreader
(continued)
Model # SP-9500X
INVERTED-V INSTRUCTIONS
• The Super-Maxx 9500 uses an “Inverted V” Baffle design over the
auger area. This baffle reduces the load on the auger.The inverted V
should not be removed unless servicing the unit.
•
WARNING: Always disconnect power source before attempting to
remove material baffle.
Inverted V Assembly
Auger Discharge Tube
AUGER DISCHARGE TUBE INSTRUCTIONS
•
The Super-Maxx Spreaders use an auger discharge tube to reduce
material leakage. It must not be removed unless servicing the unit.
•
WARNING: Always disconnect power source before attempting to
remove auger duscharge tube.
