Lit. No. 70691, Rev. 01
18
July 15, 2018
OPERATING THE SPREADER
ADJUSTABLE SPINNER
The spreader is equipped with an adjustable spinner to assist in more precise material application. The spinner
plate gives the operator control of whether the material spreads to the right, left, or is centered. Before operating
the spreader, spread some material in a clear area where the spread pattern can be easily observed to see
how it changes with
fi
n adjustment. Use the instructions below as a guide to get the desired spread pattern. The
position of the
fi
ns may need to be changed when using different materials or spinner speeds.
When looking down at the spinner, moving the fins
clockwise will adjust the spread pattern toward
the left side of the spreader.
When the fins are in the center adjustment position,
the spread pattern will be centered (with most materials).
When looking down at the spinner, moving the fins
counterclockwise will adjust the spread pattern
toward the right side of the spreader.
Summary of Contents for Precision Pro SP-1675
Page 2: ......
Page 4: ...Lit No 70691 Rev 01 4 July 15 2018...