Lit. No. 70691, Rev. 01
12
July 15, 2018
LOADING
SPREADER SPECIFICATIONS
This manual covers vehicles that have been
recommended for carrying the spreader. Please see
your local dealer for proper vehicle applications.
CERTIFICATION
WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR as
found on the driver-side cornerpost of vehicle.
WARNING
New untitled vehicle installation of a spreader
requires National Highway Traf
fi
c Safety
Administration altered vehicle certi
fi
cation
labeling. Installer to verify that struck load of
snow or ice control material does not exceed
GVWR or GAWR rating label and complies
with FMVSS.
CAUTION
Read and adhere to manufacturer's
ice-control material package
labeling, including Material Safety
Data Sheet requirements.
CAUTION
Never use wet materials or materials with
foreign debris with any of these spreaders.
These units are designed to handle dry, clean,
free-
fl
owing material.
MATERIAL WEIGHTS
Density
Material
(lb/ft
3
)
(lb/yd
3
)
(kg/m
3
)
Salt
80
2160
1282
Sand
100
2700
1602
Material densities are approximate and are based on dry,
loose material. It is the responsibility of the operator to
know the weight of the material to be spread and the vehicle
carrying capacity.
Model
Overall
Length
(in)
Overall
Height
(in)
Empty
Weight
(lb)
Overall
Width
(in)
Hopper
Width
(in)
Capacity
Struck
(ft
3
)
SP-1675
30
30
290
49-1/2
48
6.0
Leave the screen in the hopper when loading the spreader to prevent large chunks of material and large objects
from entering the hopper and damaging the spreader.
Summary of Contents for Precision Pro SP-1675
Page 2: ......
Page 4: ...Lit No 70691 Rev 01 4 July 15 2018...
