SnowEx Precision Pro SP-1675, Owner'S Manual

Page: 14 / 24

Lit. No. 70691, Rev. 01 14 July 15, 2018
ATTACHING TO VEHICLE
If you are using a TPR-020-1 Hitch Adapter (not
included with the SP-1675 spreader):
Insert the
hitch into the receiver. Lock with the hitch pin and
clip (included with PN TPR-020-1). Plug the spreader
harness in to the vehicle plug.
MOUNTING THE SPREADER
CAUTION
Before lifting, verify that the hopper is empty
of material. The lifting device must be able to
support the spreader's weight as shown in
the spreader speci
fi cations table.
To attach the spreader to a 3-Point Mount:
Simply back up to the spreader frame (requires
PN F51196). Lower the hitch until the lower arms are
at the same height as the pins on the frame. Remove
the linchpins from the lift pin. Slide the arms onto the
pins, and put the linchpin through the lift pin. Tie the
top link to spreader frame with the hitch pin. Secure
with hitch clip. Plug in and begin spreading.
Adjust the top link so the spreader is vertical. View of attachment points.
TPR-020-1 Hitch Adapter TPD-020-1 3-Point Mount