GigaPower Liquid Injection Double Burner Stove (GS-230)
Fuel Canister Attachment / Detachment (1)
Connecting the Fuel Canister and the Tube
Designated Exclusive Fuel Canisters
GigaPower Gas 500 Iso Fuel (GP-500S)
GigaPower Gas 500 Liquid Injection Fuel (GP-500BL)
(GP-500S or GP-500BL)
Please use these fuel canisters. Do not use any other fuel
canisters.
Attach the fuel canister in an upright position (connector on
top). If the canister is upside down (connector on the bottom)
when you connect it, liquid gas will be forcefully ejected, which
is extremely dangerous as this could cause ignition, fire, or
burns.
Only connect after ensuring that there is
no fire in the vicinity. The threading
that connects the fuel canister and the
device is extremely important.
Overtightening the fuel canister or
attaching it on an angle will cause gas
leakage and additional damage.
(1) Turn the heat adjustment knobs on
the front of the unit clockwise to close
the gas valves.
(2) Detach the connection tube stored on
the back surface by releasing the hook and
rotating the connector on the end of the
tube.
(3) Hold the canister in your hand with the
connector facing upwards, and line up the
connector on the end of the connection
tube with the threading.
(4) Slowly turn the fuel canister
clockwise until you have confirmed
that it has gradually tightened.
(5) To detach a fuel canister, confirm
that
the
entire
assemblage
has
sufficiently cooled down after the
flame has been extinguished, and then
follow the above procedure in reverse.
Liquid remaining in the valve will
release when detached, creating gas.
Ensure that there is good ventilation
and no flames in the surrounding area
before detaching.
White background with silver band
or white background with blue band
White background with red
band or white background
with gold band
Connector
Heat
adjustment
knob
Hook
Connection
tube
Connector
