9
(2) Slowly place the cover and windscreen such that the
aluminum frame at the back of the stove slides into the cutouts
on the left and right ends of the windscreen
4. Connecting the fuel canisters to the stove.
For GS-230
Only use designated exclusive Snow Peak fuel canisters.
Do not use any other fuel canisters.
Attach the fuel canister in an upright position (connector
on top). If the canister is upside down (connector on the
bottom) when you connect it, liquid gas will be forcefully
ejected, which is extremely dangerous as this could cause
ignition, fire, or burns.
Only connect after ensuring that there is no fire in the
vicinity. The threading that connects the fuel canister and
the device is extremely important.
Overtightening the fuel canister or attaching it on an angle
will cause gas leakage and additional damage.
(1) Turn the heat adjustment
knobs on the front of the unit
clockwise to close the gas
valves.
(2) Detach the connection tube stored on the back surface
by releasing it from the hook and rotating the connector on
the end of the tube.
(3) Hold the fuel canister in your
hand with the connector facing
upwards, and line up the
connector on the end of the
connection
tube
with
the
threading on the canister.
(4) Slowly turn the fuel canister
clockwise
until
you have
confirmed that it has gradually
tightened.
(5) To detach a fuel canister, confirm that the entire
assemblage has sufficiently cooled down after the flame
has been extinguished, and then follow the above
procedure in reverse.
Liquid remaining in the valve will release when detached,
creating gas. Ensure that there is good ventilation and no
fire in the surrounding area before detaching.
Windscreen
Main unit
Stopper
(3) Insert the stoppers
on the bottom of the
windscreen into the
slits on the sides of
the stove.
Heat
adjustment
knob
Hook
Connection
tube
Connector
