Snom 00004390 User Manual Download Page 13

Page: 13 / 126

D335 User Manual

Setting up the Phone

1. Plug the long uncurled end of the 4P4C handset cord into the connector labeled

(Fig. 1), and

connect the short one to the handset.

2. Plug the Ethernet (network) cable into the RJ45 connector labeled

NET

(Fig. 2) and plug the other

end into the network side to establish a data link.

3. If PoE is not available, insert the plug of the power supply into the connector labeled

5V DC

(Fig. 2)

and hook up the plug to the wall outlet.

4. The second RJ45 connector, labeled

(Fig. 2), is for daisy-chaining further Ethernet devices

without the need for a second Ethernet connection line.

onnecting a headset

You can use wired as well as wireless headsets with the phone.

• Wired headsets

If you want to use a wired headset, connect it to the RJ audio jack labeled

(Fig. 1).

Note: If both a wired and a wireless headset are connected to the phone, incoming calls
will go to the wireless headset.

• Wireless headsets

◦

Connecting the base station of your headset via the Snom EHS Adapter.

Connect the Snom EHS to the connector labeled

(Fig. 1 on page 12).

For more information on how to connect the Snom EHS Advanced and the headset, please
refer to the

Quick Installation Guide

of the Snom EHS Advanced that came with the device

and to the manual of your wireless headset.

◦

Connecting the headset to the phone via a Bluetooth-compatible adapter.

Insert the adapter into the USB port of the phone. See also the Quick Start Guides of the Snom
USB BT and the Snom HS BT or the manual of the third-party headset.

Attention: The default settings for USB headsets are

VID=0a12:PID=100d:HOOK=38/1

for

8.7.2.11 and higher.

If your phone is running an earlier firmware version, enter these parameters manually on

the phone's web interface at >

Advanced

Audio

> text field of "Audio parameters". Click

the question mark

to look up the parameters.

If you are using a different headset, whatever the firmware version, enter the parameters

of the headset manually on the phone's web interface at >

Advanced

Audio

> text field of

"Audio parameters". Click the question mark

to find out which parameters you need to

use for your respective headset.

Summary of Contents for 00004390































































































































Search results

Summary of Contents for 00004390

Reviews:

Related manuals for 00004390

Brands by name

Popular brands

Snom 00004390, User Manual

Search results

Summary of Contents for 00004390

Reviews:

Related manuals for 00004390

Brands by name

Popular brands