122
D335 User Manual
Appendix 4
LDAP Directory
Allows the user to look up a remote directory while dialing. Once set, this pressed key
will open up the Direcory Search window. If LDAP is setup, corresponding matching
entries as returned by the sever will be shown. If LDAP is not used and and presence_
lookup_number setting is turned on, the contact matches will be shown. The default edit
mode is alphanumeric in this state.
Logoff Identities
Caution: This option will delete all account settings!!
Usage: Mainly useful for call centers with frequently changing users.
Menu
Calling up the settings menu of the phone
Missed Calls
Missed call history list
Monitor Calls
(not available on
Snom 300)
When the phone has been programmed to monitor extensions and do/allow call pickup,
a key can be mapped to show the list of monitored extensions and do call pickup from
the monitor.
FW v8.7.2 and higher: The list will show only active extensions (i.e., busy or ringing).
When there is no activity on any monitored extensions, the list is empty.
Mute
Mutes/unmutes the microphone (handset, speakerphone, headset) during active call
Next Outgoing ID
Selecting the next identity as the outgoing identity
Presence State
Providing access to a list where the Presence state of each registered SIP Identity can be
defined (online, offline, busy, invisible).
Prev. Outgoing ID
Selecting the previous identity as the outgoing identity
Reboot
Rebooting the phone
Record
The phone does not record the voice streams at all; they must be recorded on the PBX
or other external device. Pressed during a call, the key informs the PBX to start and
stop the recording of the audio stream on the PBX. While the call is being recorded,
the recording symbol will either blink on the display or be displayed, in red
, in the status line, depending on the phone type; if the function key has an LED, the
LED will be lit throughout the recording. Please be advised that you must respect the
legal restrictions of your country for recording calls with or without the participants'
knowledge and permission.
Redial
Dialed call history list (last call at the top)
Retrieve
Retrieves new mailbox messages. This key becomes active when the phone has
received a message waiting indication (MWI) with a valid mailbox URI.
Status Messages
Currently available status messages (see Appendix 2)
Transfer
Transfering the active call or an incoming call that you do not want to pick up. See the
article
Transfering calls
in the chapter
Using the phone
.
Pressing the key will put the "Enter number" screen on the display. Enter the number
and press /
to complete the transfer.
Summary of Contents for 00004390
Page 1: ...IP Phone D335 User Manual ...
Page 113: ...113 D335 User Manual Appendix 1 ...