Issue 2.3
93
PYXIS
System User Guide
8.2.3
Connector Pin Out
The breakout panel silkscreen shows port numbering and connector pin out (where possible). The example
below is a close up of the right hand side of the Panel.
Figure 74: 9128 Breakout Panel Silkscreen Labelling
The rear panel labeling also follows the Transcoder mode port numbering, the diagram below illustrates the
9128 break out board viewed from the IDC header side.
Figure 75: 9128 Audio Break Out Panel - Metalwork Labelling
When using an audio router in MADI mode the routing port numbers will not necessarily match those on the
silkscreen. The table below details port numbers in all Modes and how they match up to the silkscreen labels
on the 9128 Breakout Board.