Snell PYXIS System User'S Manual Download Page 15 | Manualshive

Page: 15 / 101

background image

Issue 2.3

15

PYXIS
System User Guide

3.1.7 3U Power Supply Modules

Figure 9: Power Supply (3U)

The power supply slots are on the right hand side of the frame. The Pyxis frame can run from a single
supply but fitting a second provides full redundancy. Each power supply has a 240Watt rating. If both
supplies are fitted they are always live and are electrically arranged to share the load. Each has an
independent IEC mains connector. Each IEC socket is fitted with a fuse which should always be replaced
with the same type.. Each socket also contains a spare fuse.

The power supplies are sealed units.

They do not contain any serviceable items.

HIGH VOLTAGE

The units are hot swappable.

Please read the safety warnings here and on the labels.

The PSU LEDs are mounted on the router front door and will show green if okay or red if failed.

3.1.7.1

Replacing a Power Supply

The Pyxis Power supplies can easily be replaced.

Pull the power supply forward using the handle. Support the weight of the supply and be aware the unit
may still be hot.

The front door of the frame must be removed to gain access to the second PSU

Power Supplies

May be still hot

«
...
13
14
15
16
17
...
»

Summary of Contents for PYXIS






































































































Reviews:

No comments

Related manuals for PYXIS

Brand: Axxion Pages: 3

Passport PD-250

Brand: Fender Pages: 36

Brand: Hamilton/Buhl Pages: 4

Brand: Karma Pages: 8

JBL EON ONE Compact

Brand: Harman Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Jabra Pages: 73

Brand: Jam Pages: 32

Brand: Jam Pages: 14

Brand: Yamaha Pages: 17

Brand: Piega Pages: 2

Brand: Tannoy Pages: 9

Brand: DAPAudio Pages: 11

Brand: QFX Pages: 6

Brand: Daewoo electricals Pages: 8

Brand: Ultimate Support Pages: 2

Brand: Fyne Audio Pages: 12

Brand: Jensen Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands