![background image](http://html1.mh-extra.com/html/snell-and-wilcox/kudos-plus-cvr250/kudos-plus-cvr250_operators-manual_1309055067.webp)
CVR250
SECTION 5
CVR250OPS
20/10/06
www.snellwilcox.com
Version 1 Issue 4
5.5
Software Installation
Overview
ROLLCALL.EXE:
This program allows control of RollCall compatible units. Each unit has a ‘control template’ window for control
of that device. The user can configure the program for USER, ENGINEER or SUPERVISOR access levels
with password protection. It can install “template” files from new units automatically or by user request.
ROLLLOG.EXE:
This is the Log Server application that collects logging information from units on the network. Keeps a running
log file of every event received. Writes a current status file for configured units and allows the LogViewer
program to display the information.
ROLLVIEW.EXE:
This program displays the current status file written by ROLLLOG.EXE in a tabulated form. Coloured
conditions highlight warning and failure states. Can be configured for network access for remote monitoring
using share information from the LogServer program.
COMMTROL.EXE:
This program is called automatically by ROLLCALL.EXE or ROLLLOG.EXE and normally runs minimized.
Usually, there is no need to run this program by itself. This program provides the basic communications with
the PC card, serial comms ports or TCP/IP protocols. It also has monitoring facilities for data analysis.
For more details see the operator’s manual for the IQSPCR Section 3