CVR250
SECTION 4
CVR250OPS
20/10/06
www.snellwilcox.com
Version 1 Issue 4
4.39
Border
Size
The
Size Enable
function applies the settings of
the
Input Top/Bottom Blank Lines
functions.
It also applies the settings of the Horizontal Size,
Vertical Size, Zoom, Horizontal Pan, Vertical Tilt
and Variable Aspect Ratio functions (see page
4.29).
Input Top Blank Lines
This function allows active input picture lines to be
blanked out at the top of the picture and replaced
with a fixed black signal.
The range of control is from 0 to 120 field lines.
Preset is to 0 Lines.
Input Bottom Blank Lines
This function allows active input picture lines to be
blanked out at the bottom of the picture and
replaced with a fixed black signal.
The range of control is from 0 to 120 field lines.
Preset is to 0 Lines.
Border Color
When the aspect ratio or size of the output picture
is changed the picture may not completely fill the
screen area. This function will set the color of the
unused area.
Black
When selected the border will be Black.
Color
When selected the border will be of a color set by
the RED, GREEN and BLUE color controls.
Red, Green, Blue
These controls allow custom border colors to be
generated by adjusting the red, green and blue
levels.
The range of adjustment is from 0 to 255 units in
steps of 1 unit. Preset is to 0.
