CVR250
SECTION 4
CVR250OPS
20/10/06
www.snellwilcox.com
Version 1 Issue 4
4.4
Pressing the button adjacent to the required item
allows a connection to be made.
◀
TBS180
A connection may be made to a TBS180 and then
controlled from this unit’s front panel (soft and hard
button control).
◀
CVR250
A connection may be made to another CVR250
and then controlled from this CVR250 front panel
(soft and hard button control).
◀
Another module/unit
Other modules or units on the network may be
connected to in the same way.
For more details on the RollCall operating network
please consult the operating manual for IQ
Modular Shoebox.
The symbols used are shown below:
This symbol represents a gateway to a
module.
This indicates that the unit is currently
connected to this control panel. Pressing
the adjacent button will disconnect the unit
from the control panel.
This indicates that this unit is currently
connected to and locked by another control
panel.
This shows that the unit is in the standby
mode (i.e. currently not active but locked
by this control panel).
This represents a bridge connection.
This indicates that a connection has been
already made to this unit but the unit will still accept
another connection.
The RollCall network may also be browsed by
using the RollCall Control Panel.
Any module may be accessed via the RollCall
Listing item of the RollCall Control panel as shown
opposite.
02: CVR250
:02 TBS180
CVR250 box
TBS180 box
