MC500
RollCall Control Panel System Setup Screens
Issue 1 Rev 6
Page 92
© 2015 SAM
10.4.2 CVBS Encoder
Each slot has two composite video connections.
•
Source:
Use to route the processing channel to the chosen CVBS encoder.
•
Format:
Specifies the CVBS output standard. The options are:
•
PAL/NTSC
•
PAL-M/PAL-N
•
PAL/NTSC-J
10.4.3 Routing the Processing Channel
To route the processing channel output to a CVBS output:
1.
From the System menu list, select CVBS.
2.
Under CVBS Encoder B > Format, choose the format of the composite output.
For example, to create a PAL composite output on slots B1 where the converted output has
been downconverted using the processing channel:
•
Under CVBS Encoder B > Format, select PAL/NTSC.
Note:
If an illegal signal such as HD video is routed to a CVBS encoder, there will be no output
signal from this connector.
