MC500
Connections
Issue 1 Rev 6
Page 22
© 2015 SAM
4.
Connections
4.1 Rear Panel Layout
The rear panel accommodates a CVBS option with AES unbalanced audio and composite
video connections.
4.1.1 CVBS Option
4.1.2 Non-CVBS Option
4.2 Input and Output Connections
Note:
Connections labeled I/O can be used as inputs or outputs.
Label
Description
Connector
SDI In 1, 2, 3, 4
SDI inputs
4 x BNC
SDI Out A1, A2, B1, B2
SDI outputs
4 x BNC
Analog Audio In (option)
Analog audio inputs
1 x 25-way D-type
Analog Audio Out (option)
Analog audio outputs
1 x 25-way D-type
AES Audio In (option)
AES audio inputs
4 x unbalanced BNC
AES Audio Out (option)
AES audio outputs
4 x unbalanced BNC
AES Audio I/O (option)
Balanced AES audio
input/output
1 x 25-way D-type
Reference
Analog reference input with
passive loop-through
2 x BNC
CVBS In A1, A2 (option)
Composite input
2 x BNC
CVBS Out B1, B2 (option)
Composite output
2 x BNC
Option I/O A
Signal input/output
1 x dual SFP compatible
Option I/O B
Signal input/output
1 x dual SFP compatible
Monitor
HDMI output
1 x HDMI
Power A
PSU input (primary)
1 x 3-pin IEC
Power B
PSU input (secondary)
1 x 3-pin IEC
Note:
If one of the reference connectors is not in use it must be fitted with a 75 Ohm BNC
terminating plug. If not terminated correctly, genlock performance may be degraded.
Note:
The Option sockets allow for up to two dual Small Form Factor Pluggable (SFP)
transceiver modules. The SFP modules can be used to add optional fiber connectivity, or
optional I/O using HD BNC connectors.
