MC500
Operation Using the RollCall Control Panel
Issue 1 Rev 6
Page 85
© 2015 SAM
9.3 Navigating Screens
The list at the top-left of each screen shows each template
screen available for the unit in use.
To select a different template screen, choose one from the
list. Alternatively, right-click anywhere on-screen in an
opened template and choose one from the list.
9.4 Unit Status Windows
The Unit Status windows at the top of each screen display information about the status of the
unit.
The Unit Status window on a system setup screen shows the IP address of the unit, the
reference status, and the software version.
The Unit Status window on a channel operation screen shows the input, output, and audio
status of the channel.
The audio information line (shown here as Analog 2 PCM) cycles through the audio input
sources every few seconds, showing the status of each one in turn.
The audio status display information is as follows:
•
PCM: Audio is PCM
•
Mute: Audio is muted
•
Tone: Audio is a test tone
•
DolbyE: Audio is Dolby
•
Loss: Audio is unavailable or invalid
Note:
The Unit Status information is also present on the System screen and the Home screen on
the front panel.
