MC500
System Setup Menus
Issue 1 Rev 6
Page 31
© 2015 SAM
•
CTI:
The Chroma Transient Improver (CTI) examines the input video data. CTI
detects transitions of chroma and enhances chroma edges in order to artificially
restore lost color bandwidth.
Note: Use this control when the input video has chroma bandwidth limitations.
•
Pedestal:
When turned on, allows the composite source (NTSC only) to be treated as
if a pedestal is present.
•
NTSC Hue:
Adjusts the NTSC hue to correct tonal color changes.
7.2.2 CVBS Encoder
Each slot has two composite video connections.
•
Source:
Use to route the processing channel to the chosen CVBS encoder.
•
Format:
Specifies the CVBS output standard. The options are:
•
PAL/NTSC
•
PAL-M/PAL-N
•
PAL/NTSC-J
7.2.3 Routing the Processing Channel
To route the processing channel output to a CVBS output:
1.
From the System menu, select CVBS > CVBS Encoder B > Format.
2.
Choose the format of the composite output, then select Done.
For example, to create a PAL composite output on slot B1 where the converted output has
been downconverted using the processing channel:
•
Select CVBS > CVBS Encoder B > Format, PAL/NTSC, then select Done.
Note:
The unit automatically detects the input standard.
Note:
If an illegal signal such as HD video is routed to a CVBS encoder, there will be no output
signal from this connector.
