JK-W01 USER MANUAL
- 14 -
configuration tools, if many network devices with same IP Address
are connected under one SUBNET at same time (for example,
many interface modules all use default settings), the communication
could not work normally due to a collision existing in IP Address.
Therefore, when JK-W01 module with default settings is configured
with network parameter, for each time only one Ethernet interface
device could be connected, and you should ensure that the
configured IP Address is different.
When configuring JK-W01 module parameter, the wireless network
in Ad-Hoc mode and infrastructure mode should not be set with
same SSID and channel to avoid abnormal communication.
The usage of the configuration tool of JK-W01 module is referred as
below:
Run “BYNetWinConfig.exe” and the main window of configuration
tool is shown as below (Figure 5.4.1):
Figure 5.4.1 Configuration tool window
