JK-W01 USER MANUAL
- 7 -
Note:
¾
Interface Type: the type of WLAN interface fixed as Wi-Fi;
¾
SSID: shows service zone marks of wireless
communication;
¾
Mode: wireless mode, include Infra
（
Infrastructure
）
and
Ad-Hoc mode;
¾
Interface Firmware: shows the firmware version of
interface module
¾
IP Address: shows the currently used IP Address of
interface module.
¾
MAC Address: means MAC Address of interface module
¾
SUBNET Mask: SUBNET Mask
¾
GATEWAY:
GATEWAY
¾
DHCP: Shows if configuring parameters as IP Address are
obtained by DHCP. Disabled means not in use of DHCP,
and Enabled means in use of DHCP mode.
5.2 Install a Wireless Ethernet Card
Insert an exterior Wireless Ethernet Card, setup a Wireless Ethernet
Card driver or firsthand start-up the Wireless Ethernet Card on the
host.
5.3 Wireless configurations of the host
The setting interface of wireless configuration for the host computer
vary from system to system, following we will take Windows XP
(2002) as an example to explain how to do the configurations.
Installation of a SNBC Wireless Ethernet printer.
