JK-W01 USER MANUAL
- 18 -
Figure 5.4.4 Firmware Upgrade Window
Check if IP Address is same with that of selected device. If same,
click the button “Select File” to enter “open” window (shown as
figure 5.4.4), and open the upgrade program file. Then back to the
update window and click “Update” button to realize it. The process
bar shows the course. When it succeeds, a prompt shall be given.
Otherwise a failure prompt shall mention an error:
Recover default settings
Select the device in list box and click the button “Restore Default
Configuration” in main window, and then the printer could recover
the default settings as below:
SSID: default
SSID
Mode: Ad-Hoc
IP:
192.168.0.200
SUBNET Mask: 255.255.255.0
GATEWAY:
192.168.0.1
