manualshive.com logo in svg

SNBC BT-T080R, User Manual

Share
Download
SNBC BT-T080R User Manual Download Page 55

 

 

 

BT-T080R User’s Manual

 

- 49 - 

                           feed button 
                           configuration 
                           ... 
 
Bar Code Available        :UPC-A 
                          :UPC-E 
                          :EAN-8 
                          :EAN-13 
                          :CODE39 
                          :CODE93 
                          :ITF 
                          :CODABAR 
                          :CODE128 
                          :PDF417 
 

Explanation of self-test page content 

Boot Firmware---------------Printer BOOTLOADER version 

Main Firmware---------------Printer monitor program version 

H/W Parameters-------------Printer parameter setting 

H/W ID-------------------------Printer ID setting 

Flash Memory Size---------Printer FLASH capability 

Flash Logos Size------------Flash size for bitmap downloading 

Resolution---------------------Printer resolution 

Fixed Left Margin------------Printer left margin 

Fixed Right Margin----------Printer right margin 

Print Width (Max.)------------Maximum print width 

Print Width (Real)------------Real print width 

Dark Scale---------------------Print darkness 

Print Speed (Max.)-----------Print speed 

Cutter----------------------------Enable or disable auto cutter 

Paper Roll Width-------------Paper width 

Presenter-----------------------Enable or disable PRESENTER 

Presenter Mode--------------PRESENTER paper out mode 

Presenter Wait Time--------PRESENTER waiting time before 

    

     

     

retracting or ejecting paper 

Communication Interface---Communication interface setting 

Rx Buffer Size-----------------Data receiving buffer zone size 

Interface Type-----------------Interface type 

Resident Fonts----------------Font setting 

Font0-----------------------------Font A (English) 

Font1----------------------------- Font B (English) 

BarCode Available------------Printable barcode model 

 

Summary of Contents for BT-T080R

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands