BT-T080R User’s Manual
- 6 -
position 4 (three positions). Ensure the midlines of mark and paper coincide;
9
Mark position 4 can only be located in non-thermal layer.
2) In using marks, it is recommended to use the following parameters:
9
L1 mark width: 8mm
≤
L1
≤
paper width
9
L2 mark height: 4mm
≤
L2
≤
8mm
3) The reflectivity of marks is less than 10%, and the reflectivity of other parts of the ticket within mark
width along paper feed direction is over 85%.
Figure 2.4.2 Mark position
Note:
Because of the paper shaking in the feeding and paper difference in parameter, the position fixed by mark
may have a tolerance of ±1mm.
2.4.3 Recommended paper
Paper type
Manufacturer
TF50KS
－
E2C
Nippon Paper Industries CO., LTD.
F240AC/F220-VP
Mitsubishi Paper Mill CO., LTD.
KF060-FEAH
NEW OJI Paper CO., LTD.
F70NA
FUJI PHOTO FILM CO., LTD.
FV230A1
MITSUBISHI PAPER MILL CO., LTD.
Table 2.4.3 Recommended paper
Caution:
z
Please use the recommended paper or its equivalents. Using other types of paper may affect print
quality and reduce the print head lifetime.
z
Do not paste the paper to the shaft core.
z
If the paper comes in contact with chemicals or oil, it may discolor or be less heat sensitive, which will
greatly affect the print quality.
z
Do not rub the paper surface with a nail or hard metal. Otherwise it may discolor.
