BT-T080R User’s Manual
- 21 -
Position 2 for installing buffer
Buffer shaft position 2
4.3.4 Cantilever angle: 90°
The cantilever angle is 90°, that is, the intersection angle between the cantilever and the horizon is 90°.The
following drawing indicates the relative position of the print mechanism to fixing holes marked by solid
circle and the extreme size after installing the paper roll.
Following is the explanation for the modules corresponding with the paper roll with thermal layer outward
and the paper roll with thermal layer inward.
Figure 4.3.11 Installation position with the cantilever angle 90°
1
）
Paper roll with thermal layer outward
