manualshive.com logo in svg

Snap-On MODIS, User Manual

Share
Download
Snap-On MODIS User Manual Download Page 62

55

Troubleshooting

MODIS™ Unit Overheating

MODIS™ Unit Overheating

If the internal temperature of your MODIS™ unit reaches 60 °C/140 °F, it powers off automatically.

Overheating can occur under the following conditions:

•

Extended use in direct sunlight

•

Extended use on hot days

•

Extended use in a closed vehicle

•

Extended use near a heat source

•

Forcing the battery pack to charge when the MODIS™ unit is hot

z

To handle an over temperature shutoff:

1.

Remove the battery pack from your MODIS™ unit.

2.

Remove your MODIS™ unit from sunlight or high temperature area.

3.

Leave your MODIS™ unit powered off and let it cool down.

Liquid Crystal Display (LCD) Darkening

Exposure to direct sunlight can cause the liquid crystal in your screen to darken. Darkening is a 
temporary condition.

z

To return the LCD to normal:

1.

Remove your MODIS™ unit from the sunlight.

2.

Let the screen cool down.

Summary of Contents for MODIS









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands