manualshive.com logo in svg

Snap-On MODIS, User Manual

Share
Download
Snap-On MODIS User Manual Download Page 57

50

Chapter 6

Maintenance

This section describes maintenance for the following MODIS™ parts and accessories:

•

Disposal

•

Cleaning and damage inspection

•

Battery pack

•

5-amp fuse

•

Fan filter

•

CompactFlash

®

 (CF) cards

•

Liquid Crystal Display (LCD)

6.1   Disposal

Products bearing the WEEE logo (Figure 6-1) are subject to separate collection systems in the 
European Union.

Figure 6-1 

Sample WEEE logo

IMPORTANT:

Always dispose of materials according to local regulations.

Contact your sales representative for details.

6.2   Cleaning and Damage Inspection

When using the MODIS™ unit, make sure to do the following: 

•

Before and after each use, check the housing, wiring, and connectors for dirt and damage.

•

At the end of each working day, clean the housing, wiring, and connectors with a soft, clean 
cloth and gentle all-purpose cleaner.

IMPORTANT:

Avoid using abrasive or corrosive cleaning products, especially when cleaning the screen. Never 
allow liquid to enter the unit as this can cause permanent damage.

Summary of Contents for MODIS









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands