16
Getting Started
Setting Up to Print
z
To reset the Brightness/Contrast button preference:
1.
Select
Utilities > Tool Setup > Brightness/Contrast Button
.
The Brightness/Contrast Button dialog box displays (Figure 3-7).
Figure 3-7
Sample Brightness/Contrast dialog box
2.
Select
Brightness/Contrast
from the drop-down list.
The drop-down lists closes when
Y/
a
is pressed.
3.
Press
N/X
to close the dialog box.
3.11 Setting Up to Print
Your MODIS™ unit supports various aftermarket printers. Before you can use the
function,
you must do the following:
1.
Set up the printer.
2.
Configure the MODIS™ unit to print.
z
To set up the printer:
•
Refer to your printer manufacturer’s instructions for powering and paper loading procedures.
z
To configure the MODIS™ unit to print:
•
Select a printer manufacturer and port from the
Utilities > Tool Setup > Printer
dialog box.
See “Printer” on page 39 for details.
3.12 Connecting to a Computer
Connecting your MODIS™ to a computer for file sharing requires the use of the optional
ShopStream Connect™ software. ShopStream Connect is a free software program that can be
downloaded from the Internet at
software.snapon.com
.
3.13 Powering Off the Unit
When you finish using your MODIS™ unit, power it off.
IMPORTANT:
Before you power off, end all vehicle communication.