EEWH315A and 317A Tire Changer Operation Manual
Operation Manual
Page 19
NOTICE!
THESE LUBRICATION OPERATIONS ARE
NECESSARY TO MOUNT THE TIRE CORRECTLY
AND GET A PROPER ASSEMBLAGE ON THE RIM.
BE SURE YOU ARE USING APPROVED LUBRICANT
ONLY.
441
DANGER!!
Keep hands and fingers clear of mount/demount
head during operation.
NOTICE!
SOME TIRES HAVE A COLOR DOT THAT IS TO BE
KEPT ON THE OUTSIDE OF THE WHEEL AND IS
TO BE ALIGNED WITH THE VALVE STEM. IF THIS
IS THE CASE BE SURE TO ATTAIN PROPER
ALIGNMENT PRIOR TO TIRE INFLATION.
H.
Repeat the process for removing the lower bead.
This time, lift the bead opposite to the mount/demount
head to keep it in the drop center (Fig. 4.1-7).
I.
Pivot the swing arm to the right and remove the tire.
335
Fig. 4.1-7
4.2 MOUNTING TUBELESS TIRES
A.
Clean entire rim surface (Fig. 4.2-1).
336
Fig. 4.2-1
Liberally lubricate both beads of the tire with approved
tire lubricant (Fig. 4.2-2).
337
Fig. 4.2-2
