EEWH315A and 317A Tire Changer Operation Manual
Operation Manual
Page 11
1.2.1 TURNTABLE & CABINET FEATURES
EEWH315A & 317A
INTEGRATED BEAD SEATING JETS
- Air inflation jets
are integrated into the turntable clamping jaws to insure
full bead seating force directly into the tire cavity
regardless of tire diameter.
ADJUSTABLE BEAD BREAKER OPENING
- Simple
two-position bead breaker pin adjustment allows for
readjusting breaker to fit larger OD tires.
TWIN CYLINDER CLAMPING POWER
- Two 3" clamping
cylinders provide uniform clamping pressure throughout
the stroke (regardless of rim sizes) as well as providing
25% more clamping power than most single clamping
cylinder tire changers. Additionally these two smaller
cylinders reduce the critical turntable to cabinet distance,
reducing the stress on the transmission.
WHEEL CLAMPS
UNIQUE SIX POINT CONTACT CLAMPS
Provide better gripping capability regardless of dirt and
moisture.
REDUCED ANGLE CLAMPS
Increases clamping contact area with rim insuring no
slippage.
NYLON INSERT SOFT TOUCH CLAMPS
Single sided nylon insert in the clamping jaws provides
Nonmetal touch in critical customer visible areas.
VALVE CORE/TIRE TOOL STORAGE CABINET
On tire changer storage area for valves, tools, caulk, etc.
INCOMING AIR PRESSURE GAUGE
Ergonomically located air gauge allows easy operator
monitoring of incoming air pressure.
INTEGRATED PRESSURE LIMITER
Integrated safety pressure limiter stops air flow once tire
pressure has reached approximately. 55 PSI preventing
accidental tire over-inflation.
MOUNT/DEMOUNT ARM ASSEMBLY
SURGE TANK IN THE TOWER
- Space-saving design
integrates the air storage surge tank in the tower allowing
for flush to wall tire changer installation.
ADJUSTABLE SLIDEWAY
- Unique adjustable vertical
mount/demount hex shaft slideway allows for easy
operator adjustment to compensate for any cumulative
wear in the slideway causing mount/demount head
movement.
NON-SCRATCH NYLON INSERT
- Integrated into the
mount/demount head is a replaceable scratch resistent
nylon insert protecting against accidental rim contact.
SAFETY RESTRAINT ARM (Optional)
TIRE/RIM ASSEMBLY RESTRAINT
- Safety Restraint
Arm restrains tire and rim assembly to the tire machine
during the inflation process reducing potential for injury
caused by the unlikely event of catastrophic tire or rim
failure.
SIMPLE SWING ARM DESIGN
- SRA arm easily swings
to the left when not in use allowing the technician to
quickly and safely perform the inflation process without
disrupting the tire changing procedure.
GRAVITY LOCK
- SRA lock mechanism operates without
any mechanical cam system eliminating the possibility of
system deterioration or mis-adjustment from mechanical
wear.
POSITIONING SAFETY INTERLOCK SWITCH
-
Integrated switch insures that SRA arm is centered on
the tire/rim assembly before the inflation process can
begin.
ANTI-ROTATION LOCK
- Prevents SRA from rotating
horizontally during inflation process.
CONSTRUCTION DESIGNED FOR DURABILITY
RUST PROOF VALVES AND CYLINDERS
- Critical bead
breaking cylinder is lined with rustproof polyfiber liner for
years of rust free operation. Non-lined cylinders will pit
causing bead breaker power loss.
LIFETIME LUBRICATED POLYMER VALVES
- Critical
footvalves fabricated from glass/fiber self-lubricating
material providing years of maintenance free operation.
WATER SEPARATOR AND AUTOMATIC OILER
-
Lubricates all air used for machine operation, does not
lubricate air used for tire inflation, as do some competitive
models.
HIGH TORQUE 1HP MOTOR
- (air-electric models)
Industrial strength high torque turntable drive motor
eliminates tire remount stalling on low profile high
performance tires (UL/CSA approved ).
3-YEAR TRANSMISSION WARRANTY
- Designed for
extremely heavy use, the critical motor to turntable
transmission linkage carries a full three (3) year
replacement warranty.
