11
8.
To enter additional angle presets, repeatedly press
ENTER
button
until target angle screen is
displayed and repeat steps above.
Editing a Preset
Edit PSET function gives user ability to edit stored PSETS on wrench.
1.
From Preset screen to be edited, press and hold
UNITS
button
for 3 seconds.
2.
CHANGE PRESET screen is displayed.
3.
Highlight
EDIT
selection using
UP/DOWN
buttons then press
ENTER
button.
4.
TARGET
TORQUE or TARGET ANGLE screen is displayed. Value can be changed by pressing
UP/DOWN
buttons. Once desired target torque or angle value has been set, press
ENTER
button
.
5.
MINIMUM
TORQUE or MINIMUM ANGLE screen is displayed. Value can be changed by pressing
UP/DOWN
buttons. Once desired torque or angle value has been set, press
ENTER
button
.
6.
MAXMUM TORQUE or MAXMUM ANGLE screen is displayed next. Value can be changed by
pressing
UP/DOWN
buttons. Once desired torque or angle value has been set, press
ENTER
button
.
7.
BATCH COUNT screen is displayed next. Value can be changed by pressing
UP/DOWN
buttons.
Once desired batch count value has been set, press
ENTER
button
.
8.
PSET target screen is displayed labeled with same PSET number.
Note: Pressing
ENTER
button while
EXIT
menu selection is highlighted will exit without editing PSET.
Deleting a Preset
Delete PSET function allows user to remove stored presets from wrench.
1.
From Preset screen to be deleted, press and hold
UNITS
button
for 3 seconds.
2.
CHANGE PRESET screen is displayed.
3.
Highlight
DELETE
menu selection using
UP/DOWN
buttons and press
ENTER
button
.
4.
Target screen is displayed and deleted PSET is no longer available for selection.
ENTER
button
ENTER
button
UP/DOWN
buttons
ENTER
button
UNIT
button
held
Target Angle Screen
UP/DOWN
buttons
UP/DOWN
buttons
ENTER
button
ENTER
button
UP/DOWN
buttons
ENTER
button
UP/DOWN
buttons
Preset Angle Screen
00
90°
ADD PRESET
YES
NO
ADD PRESET
YES
NO
TARGET ANGLE
90°
MINIMUM ANGLE
90°
MAXIMUM ANGLE
94°
BATCH COUNT
4
PSET 02
04
90°
ENTER
button
ENTER
button
UP/DOWN
buttons
ENTER
button
UNIT
button
held
Target Angle Screen
UP/DOWN
buttons
UP/DOWN
buttons
ENTER
button
ENTER
button
UP/DOWN
buttons
ENTER
button
UP/DOWN
buttons
Preset Angle Screen
00
90°
DELETE
EDIT
EXIT
DELETE
EDIT
EXIT
TARGET ANGLE
92°
MINIMUM ANGLE
90°
MAXIMUM ANGLE
94°
BATCH COUNT
0
PSET 02
00
92°
Summary of Contents for ControlTech Micro
Page 35: ...34 ...